• Uncategorized

TECHNOLOGICAL LINE FOR RECYCLING WIRE TIRES AND RUBBER WASTE

PURPOSE:

For the processing of worn-out tires (including with cord), as well as rubber waste, into finely divided devulcanized rubber powder and crumb with a large specific surface area. Depending on the required performance, the line is equipped with a different number of modules of the same type.

DESCRIPTION:

In the line, effective grinding is carried out on a disperser-extruder based on the spring deformation method at a moderate temperature, followed by the isolation of metal or textile cord elements from the obtained powder. The dispersion of the resulting powder is 0.1-1.0 mm.

ADVANTAGES:

The resulting powder is 15-20 times cheaper than raw rubber. It can replace 20% of it for the production of tires and rubber products or 80% for the manufacture of consumer goods (soles, rugs, etc.) and non-essential products (substrates for rails, coatings for level crossings, livestock farms, etc.).

RECOMMENDED FIELD OF APPLICATION:

Enterprises for the production of rubber products, as well as organizations for the processing of solid industrial and household waste.

RESULTS OF THE RESEARCH:

Ready for implementation.

STAGE OF THE DEVELOPMENT READINESS:

Test mode.

TRANSFER OPPORTUNITY:

      • Joint bringing to the industrial level.
      • Creation of joint acceptance.
      • Joint production, sale, operation.

NOVELTY:

7 patents of Ukraine.

If you are interested in this development, please fill out the form below

[wpforms id=”3826″]

You may also like...